|
Radial Opposed Blade Damper
Series: 900D
Aluminum neck-mounted damper for the 900 series round ceiling diffusers, designed to give jam free operation. Units shall include a removable damper operator knob constructed of high-impact nylon, and shall prevent tapering after the outlet is balanced. Supplied with mounting hardware.
|
|
|
Radial Opposed Blade Damper
Series: D3
Aluminum radial opposed blade damper for use in round air diffusers. Overlapping blade design, constructed to provide full radial volume control, resulting in lower pressure losses.
|
|
|
Round Straightening Grid
Series: G3
Aluminum round straightening grid for use with all diffusers, designed to maximize the equalization of air flow through the use of a matrix blade system.
|
|
|
|
Radial Shutter Damper
Series: RSD
Galvanized steel economical radial shutter damper for use in round ceiling diffusers. Designed to permit percise damper control that does not interfere with diffuser air patterns.
|
|
|
Square to Round Transition
Series: TR
Aluminum square-to-round transition permitting installation onto round or flex duct applications. Available as an accessory to most products with square necks.
|
|
|
|
|
Opposed Blade Damper 5000
Series: D5
D5 and D5A(Aluminum) opposed blade volume dampers for the 5000 and 5500 series are designed to snap into the collar from the face after diffuser installation, and is operable from the diffuser face.
|
|
|
Opposed Blade Damper 7000
Series: D7
Extruded aluminum opposed blade dampers for the 7000 series products. Neck mount design with damper blade operator accessible from the face of the diffuser.
|
|
|
Sidewall Mounted Plaster Frame
Series: PF
Aluminum plaster frame to accomodate grilles, registers, and diffusers for ceiling and sidewall applications, to provide a uniform opening in plaster construction. The stainless steel PFSS is also available as stand-alone or an option to stainless steel grilles and diffusers.
|
|
|
T-Bar Plaster Frame
Series: TBPF
Aluminum or Steel(STBPF) T-Bar Plaster Frame designed for the installation of a ceiling diffuser into a plaster or gypsum type ceiling system. The stainless steel TBPFSS is also available as stand-alone or an option to stainless steel grilles and diffusers.
|
|
|
Deep Square to Round Transition
Series: TR DEEP
Aluminum square-to-round transition permits installation onto round or flex duct applications. Higher depth than standard TR to permit use on products with a damper. Available as an accessory to most products with square necks.
|
|
|
Opposed Blade Damper for Grilles - Steel
Series: OBD
Steel opposed blade volume damper. Screwdriver slot operable at the face of the grille or diffuser. The stainless steel OBDSS is also available as stand-alone or an option to stainless steel grilles and diffusers.
|
|
|
Series: ALPS
Replacement aluminum perforated screen(only) designed to fit into the core of ceiling diffuser models 7500AL, 7600AL, 7900AL.
|
|
|
Insect Screen
Series: IS
Insect screen for grilles and registers. Prohibits the pass-through of insects and debris.
|
|
|
|
|
|
Aluminum T-Bar Mounting Panel
Series: TBP
Aluminum T-Bar mounting Panel for ceiling diffuser, grilles, and registers; can also be used as a filler for open ceiling spaces. Also available in steel(Model STBP).
|
|
|
|
|
|
|
|
|
HEPA Filter
Series: HEPA
Filter for clean room systems that reduce particulates in the air stream for critical applications.
|
|
|
Directional Baffles
Series: BAF
Directional Baffles for 5700/5800 series diffusers. Four different blow patterns are available: 3-way blow, 2-way opposite blow, 2-way corner blow, 1-way blow.
|
|
|
TRN Transformers
Series: TRN
TRN transformers available in several different voltages ranging from 120/24 to 277/24, can be used as a voltage converter. Dual voltage transformer also available for 120/277/24 voltage requirements(model TRND120277).
|
|
|
